Peka chemie is capable of manufacturing various powder coatings based on polyester, epoxy, hybrid (Epoxy-Polyester), polyurethane and acrylic resin bases. Our powder coatings are applied on metal substrates (Aluminum, Iron, Cast-Iron, galvanized). We have different gloss levels: glossy, semi-glossy, semi-matte, matte, and super-matte. There are various decorative effects for each powder coating such as Sand textureLeather textureAntiqueMetallic effect. We also have special protective layers namely Super-durableAnti-bacterialZinc-richMetallic bonding, FBE, Rebar, etc. Our special protective layers enhance resistance and serve specific purposes.

Moreover, Peka Chemie is the leading manufacturer of Fusion Bonded Epoxy (FBE) powder coatings in the region. These products are used to coat pipelines.

Powder Coating Tests – Powder Coating Adhesion Test
The resistance of a coating against pulling off and separating from the surface, which was applied on it, is called adhesion
Powder Coating Tests - Chemical and solvent resistance test
One of the means of measuring the cure of a coating can be its resistance to chemical solvents (such as MEK). When curing is complete, the coating will be resistant to 50 strokes of cotton soaked in MEK solvent, and will only partially lose its gloss.
Powder coating tests - Impact test
The resistance of a coating film against direct and indirect impact with a hard object is called impact resistance. To determine resistance against impact, a coated plate (metal plate 0.8 mm thick) is placed under a ball punch with a fixed diameter.
Powder coating tests - Bend test
This test is used to evaluate the elasticity of coatings. In this test, coated plates will be bent around a conical or cylindrical metal axis
Powder coating defects and solutions ـ poor mechanical-chemical properties
After powder application certain defects might appear on the coated part which we have elaborated along with the factors that could be responsible for causing these.
Powder coating defects and solutions - problems in decorative coatings and wood effects
Some problems occur in decorative coatings that we have listed below. Apart from other problems that we face in decorative coatings, the following problems are specific to these coatings.
The 21st International Paint, Resin, Coatings, Composites& plating Industries Fair

The 21st International Paint, Resin Fair - Date: 26 - 29 November 2021 Visiting

FBE for High Service Temperature - PEKA Pro HT 140

If you need FBE for high service temperature up to 140°C, with excellent adhesion ...

The 19th Paints, Resins, Industrial Coatings and Composites Exhibition / from 9 to 12 December 2019

The 19th paints, resins, industrial coatings and composites exhibition It was held at the permanent location of Tehran International Exhibitions.

Features and Capabilities
Production of more than 1200 types of products up until now Manufacturing products in keeping with K7 standards Manufacturing customized products Capability to manufacture under a vast range of output volume with 12 units of production line and a total output capacity of over 14000 tons per single shift per year. Producing 18 different types of products simultaneously with special designs. Availability of an advanced, well-equipped and self-sufficient laboratory for conducting any tests required as well as conduction of research and prototyping activities. Our laboratory is certified by the Iranian Standards Organisation in keeping with ISO 17025 Certificate. Having at our disposal a wide range of software/hardware facilities to provide technical and training services for our customers within the framework of periodical visits, seminars and workshops.
Features and Capabilities