Powder Coating Tests – Powder Coating Adhesion Test
2021/04/18 - 11:40
7529
The resistance of a coating against pulling off and separating from the surface, which was applied on it, is called adhesion
Powder Coating Tests - Chemical and solvent resistance test
2020/09/01 - 09:49
8825
One of the means of measuring the cure of a coating can be its resistance to chemical solvents (such as MEK). When curing is complete, the coating will be resistant to 50 strokes of cotton soaked in MEK solvent, and will only partially lose its gloss.
Powder coating tests - Impact test
2020/08/23 - 15:58
13954
The resistance of a coating film against direct and indirect impact with a hard object is called impact resistance. To determine resistance against impact, a coated plate (metal plate 0.8 mm thick) is placed under a ball punch with a fixed diameter.
Powder coating tests - Bend test
2020/08/13 - 12:45
11822
This test is used to evaluate the elasticity of coatings. In this test, coated plates will be bent around a conical or cylindrical metal axis
Powder coating defects and solutions ـ poor mechanical-chemical properties
2020/08/03 - 11:09
10822
After powder application certain defects might appear on the coated part which we have elaborated along with the factors that could be responsible for causing these.
Powder coating defects and solutions - problems in decorative coatings and wood effects
2020/07/18 - 11:44
7504
Some problems occur in decorative coatings that we have listed below. Apart from other problems that we face in decorative coatings, the following problems are specific to these coatings.
Powder Coating Defects and Solutions- pre-treatment defects
2020/07/09 - 07:25
7496
When using powder coatings, problems occur before, during and after powder application which we are going to discuss briefly in the articles on powder coating defects and Solutions.
Powder coating defects and solutions - problems related to the application of powder coating
2020/06/07 - 13:04
15192
Some problems occur during the application of powder coating which depend on many factors. In this excerpt, we have tried to briefly state these problems and the reason they occur and the solutions for them.
Advantages and disadvantages of powder coating
2020/05/21 - 10:17
8430
When deciding to choose powder coatings, we always compare it with liquid paints. In this regard, we will consider the benefits and limitations of powder coatings. Liquid paint and powder coating have many differences both in production and application. Apart from quality, the pros and cons of powder coating are also related to the following.
What is powder coating?
2020/05/20 - 07:58
4919
Paints and coatings used in the coating world are divided into two categories: liquid paint and powder coating. We should answer the question of “what is powder coating?” by looking at the different aspects.